View History

Your Position:Home > PAINT > Industrial Coating > Epoxy Guard > High Solid Epoxy Coating *2 Packs* Sancora Epoxy@Guard

High Solid Epoxy Coating *2 Packs* Sancora Epoxy@Guard

    • NO.:S/EG/1400Series
    • Brand:SANCora
    • Goods click count:1816
    • Rank: comment rank 5
    • Shop price:RM167.80
    • 注册用户:RM167.80
    • Colour:
    • Quantity:
    • Total:

Goods Description


Goods Tag

Accessories Releate


~High Solid Epoxy Coating (2 Pack) ~
SANcora® EPOXY@Guard High Solid Epoxy Coating is a two-pack finish that gives excellent resistance to oils, chemical, water and 
abrasion. It gives an excellent protection for surfaces against harsh environment conditions.
Usage Recommended use for heavy duty protection on ferrous surfaces. Suitable for concrete floor, iron and steel 
structure, industrial building, offshore structure, laboratories and etc.
Pack Size 5 litres (4 litres base + 1 litre activator).
Composition Pigment : Organic & Inorganic
Binder : Epoxy Resin
Vehicle/Solvent : Aromatic Hydrocarbon
Technical Data Texture : Smooth Gloss Finish
Coverage : Approx. 13- 15m
/ litre (Depending on surface evenness)
Drying Time : Single coat at standard thickness (28ºC, 50% RH)
Touch Dry ≤ 4 Hours
Hard Dry ≤ 8 hours
Recoating Time : 8 hours but not more than 7 days
Thinner/Cleaner : Aromatic Hydrocarbon
Application Mixing Ratio 
(volume) 4 parts base to be mixed thoroughly with 1 part activator
Mixing 1/2 hour prior to use.
Brush/Roller For normal use, thinning is not necessary. If required, add up to 10% by volume 
with thinner.
Conventional Air 
Spray Thin 10 - 20% by volume with thinner and adjust to requirement.
Airless Spray Ready for use. Thinning is not necessary.
Surfaces must be dry and free from grease, dirt and other contaminants. Steel 
surfaces should be sanded or wire-brushed to remove mill scales and rust. For the 
best result, steel surfaces should be prepared by hand-powered tool according to 
BS7079 Part 1:1989 ST3 Standard
Wood / Concrete :
Surfaces must be dry and free from grease, dirt and other contaminants. Smoothen 
the surfaces with suitable grade sandpaper and dust off before application of paints.
Galvanized / 
Aluminium :
Remove all loose and defective paint film. Rusted and defective area should be 
sanded and feathered. Sound paint film should be sanded to provide anchorage for 
the new coating.
Shelf Life 2 years at ambient temperature in unopened containers.
Paint Guide
Surface Condition Finishing - To Paint Two Coats
Metal SANcora® EPOXY@Guard
Wood / Concrete SANcora® EPOXY@Guard
Safety, Health and Environmental Information
When applying paint, it is advisable to wear eye protection and suitable gloves.
In case of contact with eye, rinse with plenty of water immediately and seek medical advice.
Remove splashes of paint from skin by using soap or water. 
Keep container tightly closed and away from food, drinks, animal feed and out of the reach of children.
Ensure good ventilation during application and drying.
Paint must always be stored in upright position and a cool place.
Dispose off any paint waste in accordance with the appropriate Environmental Quality Regulations.
Refer to Material Safety Data Sheet for complete product safety information.

Bought notes(bought amounts latest0)

No one bought this product
Total 0 records, divided into1 pages. First Prev Next Last

User Comment

No comment
Username: Anonymous user
Verification code: captcha
© 2005-2018 Mtis Hardwares Malaysia Copyright, All Rights Reserved. 18, Jalan Bayu Tinggi 6, Taman Bayu Tinggi , 41200 Klang, Selangor Darul Ehsan. Tel: 03-33262905 E-mail:
Yahoo Messenger MSN
Run 54 queries, spents 0.040966 seconds, 117 people online,Gzip enabled,take up memory 5.223 MB